Hot Wheels Speed Mods

TxW Products for the Hot Wheel Racer

FREE SHIPPING on all parts!

The lowest cost, best value Tungsten alloys you can buy

The large bar, equal to the volume of 12 cubes, with the weight of 12 cubes  1/4″ x 1/2″ x 1.5″

This is one 95% Tungsten Alloy weight = the same as 12 cubes, 1.96 oz. $11.18 ea.

Bulk rate, buy 5 for $42.90 and save $13

1/6″ chips and Tungsten putty

Tungsten Putty is perfect to add small amounts of weight to your car. Weight of putty in kit is 1 oz (28 grams).

Tungsten tuning chips are small tungsten chips, about 44 chips = 0.5 oz. A full 1 oz of chips are in the tuning kit giving you 2 0z of flexible, dense tuning weight.

Please keep chips away from small children as they are small enough to swallow and may cause choking or internal damage.

Tungsten Putty has the following advantages:

1. Putty molds to any shape, so you can use it anywhere on your car no matter what design you have.

2. Putty is sticky. Drill a hole( 1/4″ to 3/8″ works fine), or stick it in a corner of a weight pocket.

3. Tungsten Putty is not as dense as tungsten. Be sure and maximize your use of tungsten and then finish up with a little putty. The best way to do that is to finish with TxW small tuning chips to bring the weight up to very close to your limit, and then finish off with the putty. The chips come in 1.0 oz sealed poly bags.

4. So thin you can cover the bottom of your car with chips on double sided tape and not hit the track. ( We recommend covering the chips with metal tape to keep them from getting knocked off in the stop section.)

1 oz of Tungsten Putty, $8.50

1 oz of 4 mm Tungsten Chips on tape, $8.25

2 oz of 4 mm Tungsten Chips, $16.00

1 oz of Tungsten Putty +1 oz of 4mm tuning Chips Price= $16.50

1/2″ x 20″

This is the strongest thin tape you can find. ( data from 3M) Can hold  270 oz./sq. in. on stainless steel.

Perfect for attaching weights for Hot Wheels Modified, RC cars, Pinewood Derby weights etc.
Used now to replace both rivets and welding in many assemblies, you will find it easier than glues and epoxy for your builds.

20″ 3M tape Price= $ 5.75

Small plates, sold in a set of 8 for a full 2 oz. of tungsten alloy. Two plates in the same area as a nickel.

$10.75 per set of 8

Twelve (12) Low cost Cubes of 95% W alloy for 2 oz

$12.50

Twentyfour (24) even lower cost cubes for 4 oz of weights, save $1.50

$23.50

Many of the fastest cars already use TxW Tungsten including the Terry Hill Fastest Car

Special  for 

 

for a total of 

FREE SHIPPING on all parts!

Buy with confidence from a trusted seller – TxChemist