Buy TxW products for the Pro racer NOTE: If you have trouble ordering- send me an email the_bear_98@1791.com

The large bar, equal to the volume of 12 cubes, with the weight of 13 cubes that goes behind the rear axle

Good quantities, the big bar is ground and polished, weight is  59-60 gr.

$24.00 ea. 

The large bar, equal to the volume of 12 cubes, with the weight of 13 cubes that goes behind the rear axle

Pure Tungsten (99.95%) The 1×6 bar that goes next to the axle on the inside and weighs over 1 oz – ground & polished $13.50 ea. 

BULK rate, buy 5 for $53.50

Pure Tungsten (99.95%) 

The 3, 1*2 bars also weigh just over 1 oz and are ground & polished.

$13.50 set of 3 ea.

BULK rate 5 sets of 3 = 15 parts for 

$53.50

and FREE SHIPPING for all these weights

Pure Tungsten (99.95%)

over 4.2 oz of pure tungsten to cover what you need for the lightest of bodies.

Contains one Large Bar ( ground & polished)

One 1×6 Long Bar

Three (3), 1×2 Small Bars

The “Full Monty” weights

TxW100-24-120″  = $40.00

Note: big bar is  ground & polished

Laser Body and pure 99.95% tungsten weights, the fastest weights as proven by the Pros year after year

Pro style Laser cut body, less than 6.5 grams before sanding!

TxChemist innovations

Offset rear weight to allow the best possible balance on rear wheels.

Axle for front wheels cut with the grain to increase body strength

The front axle can be placed where  the Racer wants it to be.

1/16″ removable spar to allow accurate drilling and then remove and use for additional bracing of the body.

If you just want the body- buy from eBay for $9.99

Laserbody KIT D is now the “Full Monty +”

Body = $4.20  when bought with

The “Full Monty” weights

TxW100-24-120″  = $40.00

total weights & body

Note: big bar is not ground & polished

Pro style Laser cut body, less than 6.5 grams before sanding! or Cub style Laser cut body slightly heavier

1/16″ removable spar to allow accurate drilling and then remove and use for additional bracing of the body.

If you just want the body- buy from eBay for $9.99

“Poor Monty KIT P”

for the Pro ultra light

or “Poor Monty Kit C” for Cub design

Body = $1.50  when bought with

The “Poor Monty” weights, the lowest cost tungsten alloy you can buy. Not as fast as the pure tungsten, but in the hands of a skilled builder will come very close, and should dominate youth races as proven over the years (p.s., the typical “cube” is cheap tungsten alloy also)

If you are not as skilled as the typical Pro racer, you probably can not get any speed increase with the pure tungsten anyway.

TxW95-12-55 (one part)

TxWC-P-7.1*8 {7 parts)

TxWC-p-0.32*88 (~ 88 parts}

Remember, FREE shipping!

total = $34.

$8.36 ea.

0.250 x 0.500 x 1.625″

[while limited supplies last]

One gram range price is $21 ea. for rough, $24 if ground & polished. (64 gr and 70-71 gram)

62.0-62.99 = $21.00

63.0-63.99 = $21.00

65.0-65.99 = $21.00

66.0-66.99 = $21.00

67.0-67.99 =sold out

68.0-68.99 = sold out 

69.0-69.99 = sold out

70.0-70.99 = NEW PRODUCT SUPER HEAVY

0.276″ x 0.500″ x 1.625″

Ground & Polished!

Good inventory for now

only $24.00 ea.

*****************